How We Work
Digital Photo Imaging |
 |
Having trouble deciding on a color? Let a Liquid Siding™ specialist customize a digital photo of your home and it will allow you see a generated preview your home's new color choice. |
Application |
|
 Kryton™ primer is applied to replacement wood to help seal and block stains. |
 |
| A thin layer of Kryton™ surface conditioner is applied and absorbed into the substrate. This bonding agent will help to bind together all remaining surface materials.. |
|
| The highly reflective Kryton™ thermal coat is applied to increase mil thickness and coating durability. |
|
| The protective Kryton™ top coat is custom tinted to your chosen color and applied over the thermal coat. Dura-Plas resin in the top coat bonds with layers beneath to make the entire coating system complete. |
 |
Liquid Siding™ is water based and non-toxic so application clean-up is easy and safe. Liquid Siding™ can be applied in any weather conditions as long as the wall is above 38°. Even during periods of cold and high humidity the wall can be protected for application and curing. The sun is not necessary in the curing process since Liquid Siding™ cures internally and does not UV cure. In ideal conditions Liquid Siding™ layers can be ready for over-coating in just a few hours. Liquid Siding™ is unequaled world-wide for it's superior performance. |
Exterior Preparation |
|
| Inspect all surfaces where coating is to be applied. |
Remove and re-install exterior items to facilitate proper and full application of coating. |
| Pressure wash and clean entire surfaces to be covered. |
Trench around walls for maximum coverage. |
| Sand or scrape exterior surfaces as necessary. |
Caulk and seal exterior surfaces as necessary. |
| Protect Landscaping and areas not to be covered. |
Replace or repair all exterior rotted or damaged wood where coating is to be applied. Re-nail loose boards. |
Watch Our Videos
